GYTR Gen 2 Turbo Kit for YXZ1000

-Stage 1 Designed for a stock engine and stock injectors. This flash will allow you to turn your stock boost up to 8 psi from 6. This is the maximum you can run on the stock injectors as they are running at 100% duty cycle.

-Stage 2 Designed for a stock engine and stock injectors with an open exhaust. A YXZ 1000 with a GYTR kit will run much better with an open exhaust. Your turbo will also spool quicker and the car will just be more fun to drive. Due to the large hp increase we do need to alter the flash accordingly.

-Stage 3 Designed for a built engine with open exhaust and our 1000cc injectors. With this kit you can run up to 18 pounds of boost. You can add a boost controller and adjust your boost on the fly as needed. You will need race fuel for over 12 psi. You must have exhaust for this kit (our SBD tip or a slip on) and a BUILT MOTOR (Pistons, Rods, Valve Springs, Tensioner, Head Studs)

-Stage 4 Same as stage 4 with added fuel pressure regulator with return line setup, Larger fuel pump, billet fuel pump bracket, lines and fittings. With this kit you can run up to 20 psi. This kit is being tested now and will be available shortly.

-Stage 5 Same as stage 5 with added camshafts. This cams will add about 20hp from mid to top end with no loss in bottom end. This kit is being tested now and will be available shortly

 WARNING: California Residents, this item is subject to Proposition 65 regulations for cancer and reproductive harm.